Capacitive Wire Break Sensor and Hardware Upgrade
Posted December 18th, 2020 in
Our specialty wire break sensor utilizes a capacitive sensing device with relay to detect a break on bobbins wound with multiple ends. The capacitive device connects to an adjustable sensing eyris that is set over the braided product.
When a single wire breaks and comes in contact with the eyris, the contact is detected, and the relay causes the braider to stop and automatically reset.
This upgrade has the ability to be adjustable from 2.5mm OD up to 50mm OD. Other features include braid formers and guides, circuit wiring, and sensing eyris.