Bobbin Winding Machines
“Quality Braiding Starts at The Spool”
To create top-notch braid-reinforced medical tubing, a flawless bobbin winding process is imperative.
Designed to prevent tangles, breaks, kinks and twists during the braid process, SteegerUSA’s fine wire and bobbin winding solutions ensure that bobbin material is levelly loaded onto the spool, with accurate tensioning and strict process control.
These CE compliant machines are designed to accommodate different variants in customer specified requirements such as bobbin loading compacity (quantity), ends per single bobbing, tension load ranges and material payoff reel sizes.
Materials:
Continuous Fibers and Monofilaments – Polyester, PEEK, LCP, Vectran, Dyneema, Nylon
Fine Wires – Stainless Steel, Copper, Nitinol, Tungsten, Iridium, Cobalt Chromium, Platnium
Features and Capabilities:
- Recipe Driven Controls – Adjustable Speed, Acceleration, Deceleration Tension, Pitch & Start/End Positions.
- Break Detection
- Length Counters
- Tension Feedback
- Protective Guarding
- Can Wind on Virtually Any Bobbin Type
- Accommodates up to DIN200 Payoff Reel Size
|
Specifications: |
|||
|
Bench Top Single End, Single Spindle |
Dual Spindle, Multiple End Type |
Four Spindle, Multiple End Type |
|
|
Machine Model |
SWM-001 |
SWM-002 |
SWM-004 |
|
|
|
|
|
|
Maximum Speed |
400 Ft/Min |
400 Ft/Min |
400 Ft/Min |
|
Maximum Traverse (Pay Off) |
160mm |
160mm |
160mm |
|
Maximum Traverse (Wind Up) |
130mm |
130mm |
130mm |
|
Maximum Flange (Pay Off) |
200mm |
200mm |
200mm |
|
Maximum Flange (Wind Up) |
66mm |
66mm |
66mm |
|
Tension Range |
10-500g |
10-500g |
Variable |
|
Tension Feedback |
Yes |
Yes |
Yes |
|
Savable Spool Parameters |
Yes |
Yes |
Yes |
|
Savable Recipes |
Yes |
Yes |
Yes |
© 2024 Steeger USA. All rights reserved. Designed and developed by: Tension Design